I built a PC with the A7M266-D motherboard.
It doesn't recognize my keyboard.
Sometimes it shows the message: "keyboard locked - unlock keyboard".
How can I unlock the keyboard?
PS. I tested the keyboard in another computer and it works fine!

Help me please!

Hi Rodger3d and welcome,
If its an usb keyboard make sure it's enabled in the bios.
The motherboard manule should show you it's probbally under intergrated peripherals, If not one of the pro's will drop in later.
kfh.


------------------
-------
Illegitimus non tatum carborundum.

[This message has been edited by kfh (edited 03-03-2002).]

Roger

You have the IDE drive led connection in the wrong place.
Look at the pin location on the diagram for the Power switch, Reset , and speakers.
If you also have the Hard drive led connected to that same block of pins you have it connected wrong.
The IDE connects just above that about 1 inch to a set of pins that are separate from the others,
The diagram in the manual is marked wrong.

The Pins in the block of pins is marked wrong It is the keyboard lock Not the IDE LED connection