I just purchased a Joystick called LOGITECH ATTACK 3 shown below:


http://www.itc.ua/img/dpk/2003/10/logitech.jpg


In Battlefield 2 when trying to calibrate it:

Moving it left/right - Axis 0
Moving it forward/backwards - Axis 1
Moving the little scroll button below the joystick - Axis 2

There doesn't seem to be any Axis 3 though and on this page (which is what I'm trying to base my settings on) there is Axis 0,1,2,3 - http://intel.planetbattlefield.gamespy.com/bf2/joystick.html

Any help on this would be appreciated, thanks.


HK

According to the joystick configuration instructions for the game, Axis 0 is the Roll control, Axis 1 is the Pitch control, Axis 2 is the Yaw control, and Axis 3 is the Speed control.
Does your joystick twist to the left and right? If so, then try assigning that to Axis 2, and the "little scroll button below the joystick" to Axis 3.

According to the joystick configuration instructions for the game, Axis 0 is the Roll control, Axis 1 is the Pitch control, Axis 2 is the Yaw control, and Axis 3 is the Speed control.
Does your joystick twist to the left and right? If so, then try assigning that to Axis 2, and the "little scroll button below the joystick" to Axis 3.

No it doesn't twist, only moves left right, forward & back. After reading up on some things, I don't think my joystick actually has an axis 3.


HK

If your joystick does not twist, then it does not have Yaw(Rudder) control, and it cannot be configured for Axis 2 in the game's settings. Configure its Speed(Throttle) control as Axis 3 in the game.