PDA

View Full Version : For the love of god, please help me!!!!


manick
01-01-2001, 01:06 PM
hi all,

I was hoping someone could help me, My partner's computer will not boot at all, she has a chaintech motherboard with award bios. When switched on, all that happens is a continuous two tone beep, no video output, nothing. It did once get as far as video output and confirmed the processor, checked for the hard drives and then froze!! I checked the video card in my PC, it was fine, i then used the 128mb ram from my machine in hers and it managed to get as far as checking the processor and froze again. It is now back to the stage where all i get is continuous beeps and no video output. ANyone any ideas as to what it might be.

BTW, i have had to whip the hard drive out of it and put it into my machine so that the girlfriend can work, however a new hard drive is in the pc now, although obviously if i cannot even get to POST in the first place this is not important.

Help me please!!!! http://www.PCGuide.com/ubb/frown.gif

many thanks in advance

manick

rkmca
01-01-2001, 10:27 PM
Did you set all the jumpers properly ? Check the memory parameter settings, also is CPU getting hot ?

------------------
RM

manick
01-02-2001, 12:41 PM
I believe all of the jumpers are OK, the CPU seems fine and teh memory is OK, i am now fitting a new PSU and see if thats the problem.

Thanks anyway.