PDA

View Full Version : HP895Cse printer problem



nochins
03-02-2001, 04:22 PM
My HP895Cse does not print in econofast mode,(draft), speed any longer. I use the same paper, have not changed or added any programs but still does not print in draft speed. Prints fine in normal or best mode. When printing in econofast speed, the paper feeds properly and then screeches to a halt and is stuck until I pull the paper out from the back. I have tried reinstalling the printer and driver from sratch but to no avail. The printer manual is of no help. Any tips or possible solutions?

bassvax
03-02-2001, 09:55 PM
I have found the FAQ's, known problems and other troubleshooting items on the HP site very helpful in solving prob with HP printers. www.hp.com (http://www.hp.com)
I have seen the opposite probelem (probs when printing Quality) and the cure seemed to be to go into the printer properties and change the spool settings from EMF to RAW.

------------------
Jerry

nochins
03-03-2001, 09:57 AM
Changing the printer settings to RAW corrected the problem. Thanks for the help.