MSI 6341 K7 Master Motherboard [Archive] - The PC Guide Discussion Forums

View Full Version : MSI 6341 K7 Master Motherboard

zib

07-05-2002, 08:56 PM

I have the above board. I went to put in a 1800XP chip today and it would not boot? I tried to put back in my original chip(AMD Athalon 1400)and it would not boot?? I can't seem to find a FAQ on this motherboard for jumpers etc.....Hasd anyone got one of these boards? Any help would be greatly appreciated!!!

Zib

david eaton

07-06-2002, 06:26 AM

Hi Zib Welcome to the PCguide Forums.

You can download a manual for this board fromhere (http://www.msicomputer.com/product/detail_spec/K7_Master_S.htm)

Hope that helps

David

zib

07-06-2002, 07:38 AM

I went there but can't get manual? That page not found. Thanx again for the reply though :p

Zib

mjc

07-06-2002, 09:39 AM

zib

Just went there and the page is bsck, try again, clear your browser cache first, though.

zib

07-06-2002, 07:56 PM

Can get to main page but still page not found with the support links- any of them:-(

Any other places/

Thanx,

zib

BigBlue66

07-06-2002, 10:58 PM

It's quite possible that the board won't support the 1800+.

You will probably have to clear CMOS to get back to where you can use the 1.4 TBird. You can clear the CMOS either by a jumper on the motherboard or by removing the CMOS battery (coin sized battery) for about 30 minutes. Once you boot up the first time after clearing CMOS, you will have to go into BIOS and set defaults. Save and exit. Make sure everything is working correctly and then you can make any changes in BIOS that you had before this problem occurred.