PDA

View Full Version : you home networkers



jjoel
11-05-2002, 09:36 AM
for those of you who homenetwork, and have one comp upstairs and one downstairs, how did you end up running your wires without making a grand mess?

aussieolie2
11-05-2002, 03:15 PM
Check out:
http://www.handymanwire.com/articles/homenetwork.html

and:
http://www.swhowto.com/index.html - this is great.

Hope this helps,

Olie

jjoel
11-06-2002, 09:03 AM
thats great, but uh, my home is finished and im just trying to figure out how to get through that darn insullation

aussieolie2
11-06-2002, 09:09 AM
What I do is I go under the skirting board (if you have them) simply by using a flathead screwdriver and pushing it down and under the wood. I also run under the carpet (make sure you have a carpet staple gun or something to stick it down).
Also I know people that use there air con vents to run cables around the house.

jjoel
11-06-2002, 09:09 AM
hey their wouldn't be insullation between to rooms that have a wal NOT connecting to the outside right? insullation is only found in walls connecting to the outside or maybe a garage. correct me if im wrong.

aussieolie2
11-06-2002, 09:14 AM
That is right, but movign the cables when their behind the wall is very difficult.
This is similar to what I do: http://www.taunton.com/finehomebuilding/pages/h00070.asp its not networking specific.
Also for a unprofessional way to do it:
http://howto.lycos.com/lycos/step/1,,26166+25557+18059,00.html

Hope this helps,

Olie

jjoel
11-06-2002, 10:11 AM
are their certain temperatures to keep the cable away from (extreme cold and extreme hot). what would those temperatures be?

aussieolie2
11-06-2002, 10:29 AM
I've run cables through water, - 0c Degree C temperatures and along radiator pipes (hot), so I think you should be fine.
If in doubt look at CAT5 (I presume this is what you are using) specifications.
I dont think you will any data speed due to heat conduction.

Olie

mjc
11-06-2002, 12:11 PM
There are CAT5 cables meant for special purposes like running through ductwork and wet/damp environments, etc.

There is no set rule saying there can't be insulation in interior walls, I sometimes use it for sound control, and I am not the only one.....if I don't see the wall in question in the bare-bones state I assume anything can be in it.....worked on one too many "Old House" type projects...(and no I never found a cache of old coins..:()

classicsoftware
11-23-2002, 08:10 AM
I have a 110 year old victorian house. When I deecided to run the wire, I hried an electrician. It will be far cheaper in the long run and you will have a professional looking job.