videopro
06-13-2001, 05:56 AM
Hi,
Had a working pc that could boot up. After a day,without doing anytging, it could't booot up at all. No beeps no display. Had similar problem and had to clear cmos by shorting pins1-2 till it boots. Wondering how to set up the clear cmos jumper for gigabyte GA-7IXE4 motherboard to prevent further trouble? Should i use the default setting where pins 2-3 are closed where it says "normal" in manual or should i set pin1-2 closed which says "clear cmos".
Thanks.
Had a working pc that could boot up. After a day,without doing anytging, it could't booot up at all. No beeps no display. Had similar problem and had to clear cmos by shorting pins1-2 till it boots. Wondering how to set up the clear cmos jumper for gigabyte GA-7IXE4 motherboard to prevent further trouble? Should i use the default setting where pins 2-3 are closed where it says "normal" in manual or should i set pin1-2 closed which says "clear cmos".
Thanks.