PCMCIA Network adapter code 10

[len3]

Old vintage 1994, 486 laptop , want to install pcmcia network card in windows 95 (base edition). Card is Netgear FA 411. card is recognized, installs until well until the end- when it says code 10 in device manager- drivers not installed blah blah... I tried changing the memory address, irq - no help. Any suggestions? If i have to reinstall windows again from floppies its going in the trash!~

[Budfred]

Are you sure that it will work in Win95??? What are the required specs on the box it came in??

[len3]

This adapter is supposed to work down to DOS, NE2000 compatible. It is supposed to be 95 friendly.

[slim]

If you are able to install the drivers for the card, then it sound like something else is wrong.

I am not totally sure about this, but when I recently reinstalled a old laptop, I had a similar problem with a pcmcia card. I found the problem in that case was that the pcmcia card services were not installed. Once I installed the relevant card services the problem was corrected and the pcmcia card worked fine.

Hope this helps

Slim