graemek
05-01-2005, 11:04 AM
Hi
I see this topic has been covered a few times before, but none of the topic i've seen answer my question. The pin from my case are as follows. Spkout R and Return R, Spkout L and Return L, Mic In and Mic Bias and Ground with a thin wire and ground with a thicker wire. I can connect the R and L spk and return but the problems begin when connecting the last 4 wire cos the last 4 pins on my mobo are marked as follows Power +5v, Ref, Ground and Mic so if I connected the mic to the mic pin and one of the grounds to the ground pin that leaves one more ground and and mic bias to be connected my main question is which ground do it connect and what is MIC Bias and what gets connected to Power and RET pins on the mobo. Thanks in advance if anyone can understand and help me with this prob
Thanks
Graeme
I see this topic has been covered a few times before, but none of the topic i've seen answer my question. The pin from my case are as follows. Spkout R and Return R, Spkout L and Return L, Mic In and Mic Bias and Ground with a thin wire and ground with a thicker wire. I can connect the R and L spk and return but the problems begin when connecting the last 4 wire cos the last 4 pins on my mobo are marked as follows Power +5v, Ref, Ground and Mic so if I connected the mic to the mic pin and one of the grounds to the ground pin that leaves one more ground and and mic bias to be connected my main question is which ground do it connect and what is MIC Bias and what gets connected to Power and RET pins on the mobo. Thanks in advance if anyone can understand and help me with this prob
Thanks
Graeme