View Full Version : power supply advice needed?
chris
05-03-2001, 10:10 AM
I'm trying to locate a power supply for a custom build. The Power supply out of it is a Seventeam ST-200HKR. A Tiwan company. I can't get them to return my calls.(about 3 days now). Any advice, or good scources for power supplies? It's dead. It uses 3.3volts at 15a. +12 at 5.5a.-12volt at .5amp.+5 at 15.-5 at 0.5amp. and +5Vsb at 0.2A. Any help anyone can give in trying to locate either an exact replacement, or workable substitute would be appreciated.
------------------
chris
tjaymadison
05-03-2001, 11:11 AM
If the PS is non-standard because it's in a proprietary desktop case or something like that, you may be SOL except for the mfr. If it's a standard ATX PS, any of them should work, unless it has to be on the "approved" list for Athlons or Pentium 4's.
------------------
"When I nod my head, hit it with the hammer."
-- (Moe, holding nail, to Curly, holding hammer)
[This message has been edited by tjaymadison (edited 05-03-2001).]
tjaymadison
05-03-2001, 11:36 AM
If it is a standard ATX PS, you could try Cnet Shopping or Computer Shopper (http://www.computershopper.com). The major-brand models will usually have a link to a spec sheet, so you can compare the available amps @ the different voltages to your specs. They have a "Search for Best Price" tool, and can also link you direct to a vendor. Or you can get one off the shelf at places like Best Buy or CompUSA.
------------------
"When I nod my head, hit it with the hammer."
-- (Moe, holding nail, to Curly, holding hammer)
[This message has been edited by tjaymadison (edited 05-03-2001).]
vBulletin v3.6.1, Copyright ©2000-2012, Jelsoft Enterprises Ltd.