PDA

View Full Version : IDE not recognized after soft reboot


MrKaiser
04-17-2006, 02:34 AM
I have an ASUS A7V600-X mb, AMD2800+ proc, 2 hd's on the primary IDE, using onboard ethernet, sound, etc and various AGP graphics cards. I ran across the bad capacitor posts and checked, but I didn't notice anything glaringly obvious.

The issue is that the hd's are only recognized after a cold reboot, with nothing being recognized with a software shutdown or reset. Fiddling in the BIOS auto-detect setting I can get the drives to be recognized, but, again, after restarting to apply the changes, nothing.

Any ideas would be kindly appreciated!

mjc
04-17-2006, 01:18 PM
If it was the other way around, not being recognized after a cold boot, I would say that your problem was most likely a bad battery. But...well try changing the CMOS battery anyway.