PDA

View Full Version : What this error code is trying to tell me?


ERRORMSG
05-16-2006, 12:19 AM
I:\DOCUME~1\Samsung\LOCALS~1\Temp\WER6c2e.dir00\Mi ni051306-01.dmp
I:\DOCUME~1\Samsung\LOCALS~1\Temp\WER6c2e.dir00\sy sdata.xml

BCCode : 1000007f BCP1 : 00000008 BCP2 : 80042000 BCP3 : 00000000
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1



- waaaah! what this BC code trying to point out is this a hardware problem
or a driver problem hmm...... :( :(

- ahhhhhhhhhhhhhhhh should i buy a new video card if yes pls tell me what
brand of video card is worth buying that will last for 5 yrs and will cost me
just a normal price........ :)

SufferWell1396
05-16-2006, 04:36 PM
nope, well not for the I:\ drive comments, those are probably minor file failures or its just telling you that it loaded it up

ERRORMSG
05-17-2006, 12:14 PM
ei mr suffer

- so my video card is just fine is it? coz when im playing generals for an hour it will
reset on its self and there goes the error msg on the desktop after the reset.

waaaa "windows 3.11" <======== :(

mjc
05-17-2006, 10:28 PM
If it is still locking up, resetting, etc, then there is either a driver poblem or a physical problem with your video card. In all likelyhood, the problem is heat related.

Make sure that all the fans in your computer are running and that all the dust/dirt is cleaned on a regular basis.

As a test, you can run the machine with the side panel removed and a small fan blowing into it...if it doesn't lock up while it is open then heat is the problem.

ERRORMSG
05-18-2006, 12:29 PM
well the heat issues is not a problem coz i have tested it after a reset i have touch the heat sink of my card but its not hot enough to destroy my card.

thx for the reply...