Intel 965 Sound PCI Bus 0 Problem

[RandyG]

Hi

I have put together a new Intel BOXDG965WHMKR with the E6700 2.66G processor, all seemed to go well except the sound does not work. It looks ok as far as I can see in the hardware manager except I have 1 unknown device it is listed as "PCI Bus 0 Device 27 Function 0" and when I go into the bios and turn od the onboard sound the goes away so I know it has something to do with it. I have looked on Intels site and found no help there.

Please help if you can.

THANKS!
Randy

[ski]

If you're using an onboard sound adapter that's enabled in BIOS, then make sure the MB chipset drivers are installed.

[RandyG]

It origionally when through the Intel driver CD and auto installed all it could but at the end it had a red X over the Sound Driver. I downloaded the latest one from Intel but I had the same out come. It is the onboard Intel sound by Sigmatel. Thanks for ANY help.:mad:

[ski]

So you're saying that the onboard sound adapter is enabled in BIOS, and there is no PCI sound card installed?

[RandyG]

Yes, the onboard sound is all that is being used it is enabled in the Bios and the only PCI card is a SATA 2 Adaptec.

Thanks

[saphalline]

If Device Manager shows a red X even after the latest driver, then the problem is obvious. You got a bad mobo! RMA it.

[ski]

If Device Manager shows a red X even after the latest driver, then the problem is obvious. You got a bad mobo!
Yep, that appears to be the cause.