Spearball
11-10-2006, 11:21 PM
I just got another error message. They seem to happen very randomly. And i've checked MANY MANY MANY times for bad ram. There is NONE. My supplier even had the ram checked before he shipped it to me as with the cpu. I got 2 gb of kingston ram, geforce 7800gtx 512 mb video card, amd 4000+, 250 gig wd hdd, fatal1ty sound blaster sound card, enermax 600 watt power supply, asus a8n32 sli deluxe motherboard. Windows xp SP2.
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\Joey\Desktop\MEMORY.DMP]
Kernel Complete Dump File: Full address space is available
************************************************** **********
WARNING: Dump file has been truncated. Data may be missing.
************************************************** **********
Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe -
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_gdr.050301-1519
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Fri Nov 10 22:06:49.453 2006 (GMT-5)
System Uptime: 0 days 0:22:13.024
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe -
Loading Kernel Symbols
.................................................. .................................................. .................................................. .....
Loading User Symbols
.................................................. .........
Loading unloaded module list
.............*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll -
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************
Use !analyze -v to get detailed debugging information.
BugCheck 8E, {80000003, 80526d9c, b0e0c21c, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for ctdvda2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctoss2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctaud2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctprxy2k.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+f )
Followup: MachineOwner
---------
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini111006-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \WINDOWS\system32\ntkrnlpa.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Fri Nov 10 22:06:49.453 2006 (GMT-5)
System Uptime: 0 days 0:22:13.024
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \WINDOWS\system32\ntkrnlpa.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
.................................................. .................................................. .................................................. .....
Loading User Symbols
Loading unloaded module list
.............
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {80000003, 80526d9c, b0e0c21c, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for ctdvda2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctdvda2k.sys
*** WARNING: Unable to verify timestamp for ctoss2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctoss2k.sys
*** WARNING: Unable to verify timestamp for ctaud2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctaud2k.sys
*** WARNING: Unable to verify timestamp for ctprxy2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctprxy2k.sys
Probably caused by : ctdvda2k.sys ( ctdvda2k+246bb )
Followup: MachineOwner
---------
Thanks this is getting me annoyed. I hate is when my computer doesnt work it makes me seem like i dont know anything.....
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\Joey\Desktop\MEMORY.DMP]
Kernel Complete Dump File: Full address space is available
************************************************** **********
WARNING: Dump file has been truncated. Data may be missing.
************************************************** **********
Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe -
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_gdr.050301-1519
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Fri Nov 10 22:06:49.453 2006 (GMT-5)
System Uptime: 0 days 0:22:13.024
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe -
Loading Kernel Symbols
.................................................. .................................................. .................................................. .....
Loading User Symbols
.................................................. .........
Loading unloaded module list
.............*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll -
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************
Use !analyze -v to get detailed debugging information.
BugCheck 8E, {80000003, 80526d9c, b0e0c21c, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for ctdvda2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctoss2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctaud2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctprxy2k.sys
Probably caused by : Pool_Corruption ( nt!ExFreePool+f )
Followup: MachineOwner
---------
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini111006-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \WINDOWS\system32\ntkrnlpa.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Fri Nov 10 22:06:49.453 2006 (GMT-5)
System Uptime: 0 days 0:22:13.024
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \WINDOWS\system32\ntkrnlpa.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
.................................................. .................................................. .................................................. .....
Loading User Symbols
Loading unloaded module list
.............
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {80000003, 80526d9c, b0e0c21c, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for ctdvda2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctdvda2k.sys
*** WARNING: Unable to verify timestamp for ctoss2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctoss2k.sys
*** WARNING: Unable to verify timestamp for ctaud2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctaud2k.sys
*** WARNING: Unable to verify timestamp for ctprxy2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctprxy2k.sys
Probably caused by : ctdvda2k.sys ( ctdvda2k+246bb )
Followup: MachineOwner
---------
Thanks this is getting me annoyed. I hate is when my computer doesnt work it makes me seem like i dont know anything.....