And the front audio goes... where?

[ElmerFudd]

I just bought a p965 neo motherboard and I've got no fricken clue in what order to plug the front audio for my Nikao 2750 case.

The motherboard has the following plugs for JAUD1 :
1 PORT 1 L
2 GND
3 PORT 1R
4 PRESENCE#
5 PORT 2R
6 SENSE1_RETIRN
7 SENSE_SEND
8 KEY (This one is blank)
9 PORT 2L
10 SENSE2_RETIRN

In this order :
2 4 6 _ 10
1 3 5 7 9

And my case has the following cables :
R - OUT / R - RET (requires 2 plugs)
L - OUT / L - RET (requires 2 plugs)
MIC - POWER
MIC - IN
GND

Any thoughts as to which cable goes where?

[preet]

Hi.
Did you u refered your motherboard user manual? It will help you a help in connecting the cables.

9
10
PIN SIGNAL DESCRIPTION
1 PORT 1L Analog Port 1 - Left channel
2 GND Ground
3 PORT 1R Analog Port 1 - Right channel
4 PRESENCE# Active low signal - signals BIOS that a High Definition Audio
dongle is connected to the analog header. PRESENCE# = 0
when a High Definition Audio dongle is connected.
5 PORT 2R Analog Port 2 - Right channel
6 SENSE1_RETIRN Jack detection return from front panel JACK1
7 SENSE_SEND Jack detection sense line from the High Definition Audio CODEC
jack detection resistor network
8 KEY Connector Key
9 PORT 2L Analog Port 2 - Left channel
10 SENSE2_RETIRN Jack detection return from front panel

[preet]

Hi.
Please refer to the motherboard manual, you will find exactly how to connect the wires.