PDA

View Full Version : ram upgrade


hellbuster
10-07-2001, 11:36 AM
how do i go from edo ram 32mb's to 64 sd ram? do i have to remove the edo's first or do i leave them in at the same time which would give me96 mb's tot?

BigBlue66
10-07-2001, 12:04 PM
Hi,

I assume that you have memory slots for either kind?

It's generally not recommended to try running both EDO and SDRAM at the same time. Supposedly, some motherboards will support this, but you may have to change a jumper setting. Check your motherboard manual. It should tell you if running both kinds of memory at the same time is supported and what, if any, jumpers have to be reconfigured.

Personally, I would just stick to the SDRAM for now. You should notice an overall improvement and deter any problems from trying to run both at the same time. But again, check your motherboard manual. If you don't have a manual, you can usually find one in .pdf or maybe even .txt format on the manufacuturer's website.

Good luck.

Big Blue 66


------------------
"Right turn Clyde!"

bassman
10-07-2001, 12:05 PM
Hello Hellbuster and wecome,
Gotta remove the old stuff to make the new stuff work. http://www.PCGuide.com/ubb/frown.gif

------------------
Please let us know if what we suggest helps. This helps us help you better.