PDA

View Full Version : New PSU fan needed


jjay03
05-16-2008, 08:23 AM
My PSU has a 120mm fan but it is a 2pin connect where can I find one of these? My old one makes a lot of noise.

Thanks

Rick
05-16-2008, 04:17 PM
120mm X ??mm

Once you know the correct size
Just about any fan will work

120MM fans are common on all hardware web sites

jjay03
05-16-2008, 04:20 PM
Well I know the correct size but most are 3 pin and I needed 2pin. I found one though.

mjc
05-16-2008, 04:42 PM
There is always the option of cutting and splicing the connector...

jjay03
05-16-2008, 04:48 PM
There is always the option of cutting and splicing the connector...

Yup thats what im doing :) its a 2 wire it just dont have the right connecter. The PSU I have is the rosewill rp500. Hopefully another fan with work fine should be a lot quieter also.
Here is the fan I got even has the blue LEDS like the one that was in the PSU.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811998121
If you look close there is only 2 wires coming from it where most have 3.