PDA

View Full Version : Problem with signal from PC to Monitor


verachion
05-22-2009, 11:10 AM
I have a problem with my PC when you switch it on there appears to be no connection to the monitor. I have tried various different video cards but to no avail. Can you help at all?

awaj
05-22-2009, 11:18 AM
test the monitor on a known to work computer. if the monitor works fine, try a different cable.

verachion
05-22-2009, 11:24 AM
Thanks for the reply, the monitor works fine and the cable I am using works fine. Its def something to do with the PC.

classicsoftware
05-22-2009, 11:33 AM
You need to completely uninstall the driver and then remove the video card from device manager and allow windows to re-detect it....

verachion
05-22-2009, 11:38 AM
You need to completely uninstall the driver and then remove the video card from device manager and allow windows to re-detect it....

Unfortiunately the PC doesn't boot up therefore I can't uninstall the driver. I cannot get any signal from the PC to the monitor.

Paul Komski
05-22-2009, 12:02 PM
Make and model of PC or motherboard please? Also which operating system?

Is the card PCI/PCIe/VGA etc and does the PC give any beeps at start-up? A BareBonesBoot (http://www.paulski.com/zpages.php?id=1718) might help locate the problem device which might or might not be the video card.

Do you know if on-board video is an option or indeed whether there is any hope of entering the BIOS setup - probably not? What colour is the LCD on the monitor - does it flicker at all or does it not even come on at all?