PDA

View Full Version : video camera connection


prakashn
06-05-2002, 11:52 PM
I have a pentium 200 MMX system with 64 MB RAM running win 98 and 4 MB PCI VGA card with NO UsB ports. Is it possible to connect a USB video conferencing camera using any adaptor. Pl help.

bmpkns2
06-06-2002, 12:14 AM
Sorry, but you have to have a USB port to use it. You can buy one almost anywhere, around 30-50 dollars, make sure that it is either PCI or ISA mounted, depending on the slots on your motherboard. I bought one from Wal-mart for about 35 dollars, then upgraded the whole thing and now it is onboard. Good luck!

I noticed you posted this same question twice, it's only needed once in here, these guys work hard enough to keep this site going already, so please dont post twice. http://www.PCGuide.com/ubb/cool.gif
------------------
Gigabyte GA-5AA MB
AMD K6-2/550 Mhz
15GB hard drive
Rage Fury Pro 32 MB video
Linksys 10/100 NIC
128 MB RAM http://www.PCGuide.com/ubb/cool.gif

[This message has been edited by bmpkns2 (edited 06-05-2002).]