![]() |
|
|
#1
|
|||
|
|||
|
I have a Featron 600 (canon?) pentium 133 running WIN95 that doesn't always run the POST on power on. The hard drive spins up, but no display, no beeps, nothing. I have also tried boot from the A: drive, but it never gets that far. Power down and power up doesn't help, then, out of the blue the crazy thing boots and runs fine. Ive had it apart to check all connections, checked the BIOS for anything strange, reinstalled the operating system but still has the same problem. When it starts, it runs great, but I can't figure out why it wonk't start. Any help would be appreciated.
|
|
#2
|
||||
|
||||
|
When I've dealt with other types of equipment that ran on batteries with this kind of behavior it was usually dirty battery contacts. I usually clean the contacts with a pencil eraser and then wipe with an acohol soaked cotton ball. Wait until competely dry before trying.
------------------ mjc I'm making my own links list:Computer Links
__________________
AV, Anti-Trojan List;Browser and Email client List;Popup Killer List;Portable Apps
“When men yield up the privilege of thinking, the last shadow of liberty quits the horizon.” - Thomas Paine Remember: Amateurs built the ark; professionals built the Titantic." |
|
#3
|
||||
|
||||
|
Well........my guess is either the power supply is going or the hard drive is going.........both require a tech to fix in all likelyhood.
------------------ "As hard as a rock & dumb as a brick"...Windows CEMeNT
__________________
XP didn't save Me ! |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
|
|