|
|
|
|
|
||
|
NOTE: Using robot software to mass-download the site degrades the server and is prohibited. See here for more. Find The PC Guide helpful? Please consider a donation to The PC Guide Tip Jar. Visa/MC/Paypal accepted. |
|
|
|
#1
10-09-2003, 04:42 PM
|
|||
|
|||
|
PCMCIA Network adapter code 10
Old vintage 1994, 486 laptop , want to install pcmcia network card in windows 95 (base edition). Card is Netgear FA 411. card is recognized, installs until well until the end- when it says code 10 in device manager- drivers not installed blah blah... I tried changing the memory address, irq - no help. Any suggestions? If i have to reinstall windows again from floppies its going in the trash!~
|
|
#2
10-09-2003, 09:39 PM
|
||||
|
||||
|
Are you sure that it will work in Win95??? What are the required specs on the box it came in??
__________________
Budfred ..... Caveat Emptor.... Helpful links SpywareBlaster... HijackThis... ATF Cleaner... Post a complaint about malware here!! So how did I get infected in the first place?? MS MVP 2006 and ASAP member since 2004... If you PM me for help, expect an irritated response... Post in the forum...
|
|
#4
10-10-2003, 07:28 AM
|
||||
|
||||
|
If you are able to install the drivers for the card, then it sound like something else is wrong.
I am not totally sure about this, but when I recently reinstalled a old laptop, I had a similar problem with a pcmcia card. I found the problem in that case was that the pcmcia card services were not installed. Once I installed the relevant card services the problem was corrected and the pcmcia card worked fine. Hope this helps Slim
__________________
Slim Rules!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
|
|
