Home > Remote Codes

Dynex TV remote codes – how to program with and without codes

Here's how you can quickly set up a universal remote with your Dynex TV!
Abdul Haddi
Last Updated on
Dynex TV remote codes – how to program with and without codes
PC Guide is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Read More

Table of Contents

If you’re wondering how to program a Dynex remote for your TV and searching for the codes, we have you covered right here.

If you have multiple TVs in your home and are tired of managing all their remotes, you’d want to consider getting a universal remote. This can be paired with all your devices, and you can control them using a single remote. Dynex TVs can also be paired with universal remotes, and the process is pretty simple. However, you’ll need the correct universal remote codes for Dynex TV for it to work.

This is where we come in. In this guide, we’ll discuss what Dynex universal remote codes are and how you can use them to connect your universal remote to the TV.

Today's best deals

*Stock availability and pricing subject to change depending on retailer or outlet.

✓

Quick Answer

The Dynex remote can be programmed with and without code. If you have the right code, you can – Power on TV (or other device) > Press ‘Comp’ and ‘Enter’ button simultaneously > input the code > test the code > press the TV (or other device button) to save the code.

For convenience, we have listed Dynex remote codes in this guide. If you want to set the Dynex remote up without codes, read our guides below.

Dynex TV remote codes list

3-Digit Codes720, 001, 538, 533, 834, 585, 701, 632, 706, 256, 698, 726, 500, 220, 221, 115, 503, 800, 120, 650, 724, 200, 135, 400, 096, 167, 415, 424, 567, 577
4-Digit Codes0177, 0185,  0282, 0039, 0280, 0038, 0154, 0236, 0463, 0180, 0178, 0179, 0019, 0623, 1810, 2049, 2184, 1780, 1463, 2288, 5311, 3161, 0371, 2891, 1507, 1181, 0135, 1785, 1182
5-Digit Codes 10463, 11463, 11780, 11785, 10180, 10178, 10171, 10623, 11963, 10096, 12049, 12184, 18731, 18437, 12288, 18633, 18339, 18924

How to program a Dynex TV with remote codes

Here’s how you use the Dynex TV remote codes to program your universal remote.

Step

1

Turn on your Dynex TV

Turn on your TV by using the original remote. If it is not working or you lost it somewhere, you can turn the TV on using the manual power button.

Step

2

Initiate the setup process

Next, press and hold the ‘Comp’ button and ‘Enter’ button simultaneously. Do this until you see a light flashing on the remote, which means it’s ready to be programmed.

Dynex remote with comp button highlighted

Step

3

Enter the Dynex TV remote code

Point your universal remote towards the TV and use the numeric keys to enter a code.

Dynex remote with number pad highlighted

Step

4

Check if the remote has been connected

Now, press the volume up or volume down button to see if the remote has been paired. If the volume is not increasing or decreasing, it means the remote has not been connected, and you'll have to try another code.

Step

5

Store the code

After you've found the correct code, press and hold the TV button to store it. The light on your universal remote will blink twice after the code has been successfully stored. 

Dynex TV remote control with arrow showing TV button

How to program Dynex remote without codes

Step

1

Power on the TV

The first step is to turn on your TV.

Step

2

Press the ‘TV' button

On your Dynex remote, press the ‘TV' button to set the remote up for your TV. For DVD or CBL, you will have to press the corresponding buttons. Hold the button until you see an LED light blinking.

A close-up of a Dynex TV remote control with the device buttons highlighted

Step

3

Press CH+ and CH- button

Now, aim the Dynex remote at the TV and press the CH+ and the CH- buttons. Keep pressing these until the TV turns off.

Black Dynex TV remote control with channel buttons highlighted

Step

4

Test the code

Now, to see if the code that has been selected is right or not, you will have to test it. Press the power button – if your TV turns on, it means the code is programmed correctly.

Step

5

Press the “device” button

Once you have the right code, you have to press the “device” button – that is, the TV, DVD, or other buttons for your selected device. The light on the remote will blink twice, which indicates that your code has been saved successfully.

Dynex television remote control with device buttons highlighted

How do I program my universal remote to my TV without the code?

Yes, you can use the auto-programming feature to connect your universal remote to the TV without the code, but this method does not work for every remote. To do this, you have to power on the TV > press the ‘TV’ on the Dynex remote > Press the CH+ and CH- buttons > test the code > and press the TV button to confirm.

Conclusion

If you have the correct Dynex TV remote codes, programming your universal remote is a pretty straightforward task that will only take a few minutes. If the first code you enter does not work, keep on entering the other codes until you find the correct one for your TV. And in case the remote is not working even with the correct code, there may be something wrong with its hardware, or its battery may be weak. In this case, you might want to get in touch with the Dynex customer service.

About the Author

Abdul Haddi

Abdul is a tech writer and Editor for PC Guide, specializing in all things tech, gaming, and hardware.