The RX 9070 XT and RX 9070 are right on the horizon and will hit the shelves soon. The competition will be tough for Nvidia as AMD priced these GPUs at $599 and $549, respectively, much lower than the RTX 5070 Ti but matching the MSRP of the RTX 5070. While the official dimensions for these GPUs haven’t been disclosed yet, ASUS has the measurements for the RX 9070 XT OC listed as 312 x 130 x 50 mm (LxWxH). 

We’ll use these measurements as a benchmark because this GPU has better specifications than the 9070, meaning it requires a more robust cooling mechanism. Therefore, any PC case that can house the RX 9070 XT can also support the RX 9070. This means that the chances of it being larger due to accommodating better cooling solutions are higher, so any PC case that can house the RX 9070 XT should also be able to handle the RX 9070.

Besides that, most of the PC cases have plenty of GPU clearance, and not even the RTX 5090 could give them trouble. However, it is always better to have more room as that means you can fit more fans to an efficient airflow, and the third-party variants of these cards could take up more space as that is generally the pattern we see. 

Here are a few PC cases that caught our eye, but plenty more options are available, so be sure to check out various retailers as well.

Products at a glance

• 
  Best case for RX 9070 XT and RX 9070

  Antec C5 ARGB

  • Size : Mid tower
  • Max GPU length: 410mm
  • Motherboard compatibility: ITX, mATX, ATX
  • I/O: 2 x USB 3.0, 1 x Type C 3.2 Gen 2, 1 x mic, 1 x audio
  • Fan support: Top and size: 3 x 120mm or 2 x 140mm, Bottom: 3 x 120mm, Rear: 1 x 120mm
  • Radiator support: Top: 1 x 360mm, Side: 1 x 280mm, Bottom: 1 x 360mm, Rear: 1 x 120mm

  Shop on Amazon
• 
  Best airflow case for RX 9070 XT and RX 9070

  NZXT H6 Flow

  • Size : Mid tower
  • Max GPU length: 365mm
  • Motherboard compatibility: ITX, mATX, ATX
  • I/O: 2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2×2 Type-C (20 Gbps)
  • Fan support: Top: 2 x 120/140mm, Bottom: 2 x 140mm, Rear: 1 x 120mm, Front right: 3 x 120mm
  • Radiator support: Top: 360mm, Rear: 120mm

  Shop on Amazon
• 
  Best budget case for RX 9070 XT and RX 9070

  Cooler Master MasterBox Q300L

  • Size: Micro ATX
  • Max GPU length: 360mm
  • Motherboard Compatibility: MATX
  • I/O: 2 x USB 3.0
  • Fan support: Top: 2 x 120mm, Rear: 1 x 120mm, Bottom: 1 x 120mm, Front: 2 x 120mm or 140mm or 240mm radiator
  • Radiator support: Front: 1 x 240mm

  Shop on Amazon

How we picked 

To select the best pc case for the RX 9070 XT and RX 9070, we considered their size and then selected a handful of cases based on their price, connectivity options, design, aesthetics, included fans, and maximum GPU and radiator size support. These factors allowed us to recommend what we think are the best cases in the short and long run.

Our top picks

01

Antec C5 ARGB

Specifications

• Size : Mid tower
• Max GPU length: 410mm
• Motherboard compatibility: ITX, mATX, ATX
• I/O: 2 x USB 3.0, 1 x Type C 3.2 Gen 2, 1 x mic, 1 x audio
• Fan support: Top and size: 3 x 120mm or 2 x 140mm, Bottom: 3 x 120mm, Rear: 1 x 120mm
• Radiator support: Top: 1 x 360mm, Side: 1 x 280mm, Bottom: 1 x 360mm, Rear: 1 x 120mm

Reasons to Buy

• It comes with 7 x 120mm ARGB PWM fans
• It has a 410mm GPU clearance
• Supports back-connect motherboards

Reasons to Avoid

• The included fans could be loud
• No instructions for the built-in controller hub

• Shop on Amazon

After searching the market, we found the Antec C5 ARGB PC case, and we think this is one of the best cases for RX 9070 XT and RX 9070. For starters, this is a dual-chamber PC case that ensures optimal cooling and cable management with 95mm of space available for that. 

Besides that, it offers a 270°C view, which is very aesthetically pleasing as all the lights and components are visible from the front and the side. A neat aspect of this case is its cutouts that accommodate back-connect motherboards. These motherboards have connections on the back than the front, giving them a “wireless” look. The MSI B650M Project Zero is a back-connect motherboard we’ve reviewed. 

You also save plenty of PC case fans as this casing comes with 7 x 120mm ARGB PWM fans. What this means is that the only area left to cover is the top, which can accommodate a 360mm radiator. The side and bottom support 280mm and 360mm radiators, giving you plenty of orientation options. 

The maximum GPU clearance of this PC case is 410mm, which is more than enough for the RX 9070 XT and 9070. And even if third-party variants push the length to 300mm or above that, it still wouldn't be an issue. However, to ensure that the GPU doesn't collide with the fans or radiator on the side, its height should be less than 75mm. 

There is a built-in ARGB and PWM fan controller to control the accompanying seven fans, which can synchronize the lighting effects with the motherboard or turn them on via an LED control button. 

Overall, this is a pretty great case for the RX 9070 XT or 9070, and the only downside is that it might be a bit expensive for some, but a white option is also available that costs less. 

What users say

According to Amazon reviews, this PC case has great value for money, fan capacity, aesthetics, and build quality. One reviewer said: “I didn't expect this case to be this good especially for 110 dollars. It's easily compared to the Lian li case without it being 200 dollars and it comes with 7 Rgb fans with a fan controller that the Lian li case doesn't. It looks very good quality and the Rgb is great too. The airflow is amazing with removable dust covers and it comes with a ton of extra screws.”

02

NZXT H6 Flow

Specifications

• Size : Mid tower
• Max GPU length: 365mm
• Motherboard compatibility: ITX, mATX, ATX
• I/O: 2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2×2 Type-C (20 Gbps)
• Fan support: Top: 2 x 120/140mm, Bottom: 2 x 140mm, Rear: 1 x 120mm, Front right: 3 x 120mm
• Radiator support: Top: 360mm, Rear: 120mm

Reasons to Buy

• Good space for the GPU and PSU
• It can accommodate a good amount of fans
• It has velcro straps for easy cable management

Reasons to Avoid

• It is a bit expensive
• It doesn't have an RGB controller
• It doesn't have removable dust filters

• Shop on Amazon

For the optimal airflow to keep the RX 9070 XT or RX 9070 running cool, we recommend you check out the NZXT H6 Flow. This PC case comes with three pre-installed 120mm fans mounted for optimal cooling performance. 

A great aspect of this case is that no tools are required to open it. The Top and sides can be removed by hand, meaning if you're cleaning it or want to adjust something inside, you can do so quickly. In addition, the top supports a 360mm radiator, and the maximum GPU clearance is 365mm. 

What this means is that if the 267mm GPU length for the RX 9070 XT is accurate, you'll have plenty of space inside this PC case. The front right has three 120mm fans installed, which can run at 1200 RPM max. 

Besides that, it supports 2 x 140mm fans on the bottom and 1 x 120mm fan on the rear. So, the side and bottom fans can pull in the cool air, and the radiator and rear fan can expel the hot air, ensuring optimal and efficient airflow. 

This casing also comes with straps and features wide channels for easy and efficient cable management. It also has two expansion slots for a 2.5” SSD and one slot for a 3.5” HDD. Overall, this is a stylish mid-tower PC case with plenty of features and high-end I/O capabilities, and its GPU clearance makes it a great option for the upcoming Radeon GPUs. 

What users say

According to Amazon reviews, this casing has good space, build quality, and airflow. One reviewer said: “This was a perfect case for my new gaming build. fit a 4080 super and liquid cooling for my cpu. I got a cpu that runs pretty warm but I’ve had zero issues when running it this case! The glass panels are high quality and easy to remove and reinstall.”

03

Cooler Master MasterBox Q300L

Specifications

• Size: Micro ATX
• Max GPU length: 360mm
• Motherboard Compatibility: MATX
• I/O: 2 x USB 3.0
• Fan support: Top: 2 x 120mm, Rear: 1 x 120mm, Bottom: 1 x 120mm, Front: 2 x 120mm or 140mm or 240mm radiator
• Radiator support: Front: 1 x 240mm

Reasons to Buy

• It has 360mm GPU clearance
• The I/O panel can be adjusted in 6 different ways
• It has excellent value

Reasons to Avoid

• It only supports mATX or ITX motherboards
• It doesn't come with preinstalled fans

• Shop on Amazon

If you're looking for a PC case that doesn't take up a lot of space or finances, the Cooler Master MasterBox Q300L is for you. This is a mATX PC case, but despite its small size, it has a 360mm GPU clearance, meaning it should easily support the RX 9070 XT or RX 9070. 

The first aspect that stands out is the outlook of this PC case and the patterns on the front and top, which seem like they are on the build but are actually on the magnetic dust filters. Besides that, it can accommodate a CPU cooler with a height of 159mm and a PSU with a 160mm length. 

When it comes to the fan settings, this casing can house 2 x 120mm fans on the top and the front and 1 x 120mm fan in the rear or the bottom. However, the front also supports 140mm fans or a 240mm liquid CPU cooler. 

A unique feature of this case is that the I/O panel can be mounted at the front, bottom, or side on both sides of the PC case. While you might think that is a weird addition, it makes more sense as this casing can also be used horizontally, meaning where you place the I/O panel affects how easily you can access it. 

Overall, despite being a micro ATX PC case, it has plenty of unique features and should be able to accommodate the RX 9070 XT or RX 9070 easily without any issues. 

What users say

According to Amazon reviews, the Cooler Master MasterBox Q300L has excellent value for money, build quality, looks, and space. One reviewer said: “Cost friendly, light weight, excellent airflow, fits everything great. The mesh style walls makes it easy to place fans however you would like. Liquid coolers fit perfectly. Wire management is great with these cases. Super easy to feed wires, easy to disassemble and reassemble.”

How to choose the best case for RX 9070 XT and RX 9070

The GPU clearance is the main factor you need to consider before buying a PC for the RX 9070 XT and the RX 9070. This should tell you whether the case can comfortably house any of these GPUs without cramping the space. Besides that, we’ve listed a couple of other factors below.  

Budget

The first step you need to take is to filter the available options based on your budget. This will give you a list of products that won't break the bank but also have good features. Many PC cases come with built-in RGB and case fans and also feature high-end connectivity options; however, if you've got a good motherboard, you can probably skip out on scoring a case with plenty of USB ports as you'll have those in the motherboard.

This will help save you some money, which you can use to get 140mm PC case fans or a good AIO cooler for your processor. 

Airflow

An important aspect to consider is the airflow. It goes without saying that more airflow is better as it keeps your components cool, so selecting a PC case that supports plenty of fans and has good air inlets is crucial. This will ensure the airflow isn't restricted, and you can direct it any way you want by switching the positions of the PC case. 

For example, three in the front are pulling in the cool air, two on the top, and one in the rear to expel the hot air. This is the most common PC case fan orientation.

What is the recommended GPU clearance for RX 9070 XT and RX 9070?

The RX 9070 XT’s length can vary between 289mm and a maximum of 331mm, which is also the maximum length for the RX 9070. So, depending on the variant you get, it’ll be different, but as a standard, ensure that the PC case you’re looking at has a GPU clearance of more than 330mm to promote adequate airflow and cooling.

Will a small case affect cooling?

A small casing has less space between the components, and if the components barely manage to fit in, it means the space is cramped up, and the airflow will be restricted. The heat generated by the GPU, CPU, and other components won’t be expelled efficiently, leading to a rise in temperature, which will impact the performance of your system.

So, a small case will affect the cooling, and to avoid that, we recommend using an AIO cooler if the case can support that and ensure a good amount of clearing for the GPU.