Best PC case for RTX 5070 and 5070 Ti in 2025 – our top picks
Table of Contents
The RTX 5070 and 5070 Ti are two of the four new RTX 50-series announced at the start of January and are all set to be released sometime in February. These cards are slightly smaller than their predecessors, as the RTX 4070 has a 244mm length and 112mm width, while the 5070 has 242mm x 112mm (LxW), according to the Nvidia listing.
Currently, it looks like we will get an RTX 5070 Founders Edition, according to Nvidia RTX 5070 page, but the jury is out with the RTX 5070Ti. This means that for the Ti, you should expect some variation in size, but that also goes for the 5070 too. Even a quick glance at some of the currently available AIB models turns up much larger editions than the Founders Edition. Case in point, this ASUS PRIME GeForce RTX 5070 is SFF compatible, and comes in at 304 x 126 x 50 mm – both longer and wider than the FE.
🚀 Save Up to $1,200 on the Samsung Galaxy S25!
Pre-order now and save big with trade-in and Samsung credit. Limited time only!
*Includes trade-in value + $300 Samsung credit.
Either way, most PC cases should give you enough room to accommodate either 244mm or above 300mm, but we’d say since these cards are pretty powerful, it’s worth going for a case that allows for loads of airflow and multiple fans. That being said, make sure you check everything before making your purchase, especially for the RTX 5070Ti which may come in bigger as standard.
Here are a few PC cases that we though stood out from the crowd, but of course, the world is your oyster!
Products at a glance
- Best case for RTX 5070 and 5070 Ti
CORSAIR 7000D AIRFLOW
- Size: Full tower
- Max GPU length: 450mm
- Motherboard compatibility: ITX, mATX, ATX
- I/O: 4 x USB 3.0, 1 x USB 3.1 Type-C, 1 x 3.5mm headphone/mic jack
- Fan support: Top: 3 x 120mm or 140mm, Front: 3 x 120mm or 140mm, Rear: 1 x 120mm or 140mm
- Radiator support: Top: 1 x 360mm or 420mm, Front: 1 x 420 or 480mm, Rear: 1 x 120mm or 140mm
- Best high-end case for RTX 5070 and 5070 Ti
HYTE Y60 Snow White (CS-HYTE-Y60-WW)
- Max GPU length: 375 x 75 mm (LxH)
- I/O: 2 x USB 3.0, 1 x USB 3.2 Type-C, 1 x audio jack
- Included fans: 3 x 120mm
- Best budget case for RTX 5070 and 5070 Ti
MUSETEX G07 ATX PC Case
- Max GPU length: 320mm
- I/O: 2 x USB 3.0, 1 x headphone, 1 x mic
- Included fans: 6 x PMW ARGB
How we picked
To select the best pc case for the RTX 5070 and 5070 Ti, we first took into consideration their size and the expected size of third-party variants and then selected a handful of cases based on their price, connectivity options, design, aesthetics, included fans, and maximum GPU and radiator size support. These factors allowed us to recommend what we think are the best cases in the short and long run.
Our top picks
- Size: Full tower
- Max GPU length: 450mm
- Motherboard compatibility: ITX, mATX, ATX
- I/O: 4 x USB 3.0, 1 x USB 3.1 Type-C, 1 x 3.5mm headphone/mic jack
- Fan support: Top: 3 x 120mm or 140mm, Front: 3 x 120mm or 140mm, Rear: 1 x 120mm or 140mm
- Radiator support: Top: 1 x 360mm or 420mm, Front: 1 x 420 or 480mm, Rear: 1 x 120mm or 140mm
- Comes with three 140mm fans
- Sides panels have hinges for easy access
- Plenty of I/O
- It comes with a heavy price tag
- It is a heavy PC on its own
We recommend checking out the Corsair 7000D Airflow PC case if you're looking for the best option for the RTX 5070 or 5070 Ti. It features a robust black design with a mesh grill in the front that promotes good airflow.
This PC case comes with three 140mm Corsair AirGuide fans. These fans utilize anti-vortex vanes to direct the air into a funnel-like shape, which helps it reach the components more efficiently. Thus, you can save some money on 140mm fans and get good cooling. However, these fans don't have RGB, so if you want that, you'll have to purchase them separately. If you're interested in checking out some options, our best RGB fans guide has the top picks.
This PC case has plenty of space inside to install a cooling solution. In the front, you can mount three 140mm fans, four 120mm fans, one 420mm radiator, or one 480mm radiator. On the top, it can hold three 120mm or 140mm fans, one 360mm radiator, or one 420mm radiator. At the back, it can accommodate one 120mm or 140mm fan or radiator.
So, regardless of how much heat your components are generating, if this casing is decked out with all the cooling solutions it can support, you probably wouldn't have to worry about your GPU overheating.
The RTX 5070 FE has a length of 242mm, and it doesn’t look likely that third-party variants will be too long for this case, as it has maximum GPU length of 450mm. On top of that, it features a built-in three-slot vertical mount, meaning if you plan to mount the 5070 to 5070 Ti vertically, you wouldn't have to buy a mounting kit; you'll only need to purchase a riser cable.
Regarding connectivity options, which are important as not everything you want to reach around to connect a USB to the motherboard ports, there are four USB 3.0 ports, one USB 3.1 Type-C ports, and a 3.5mm audio jack.
This PC case allows you to connect multiple peripherals, charge your mobile with the Type-C port, or enjoy high transfer speeds. It is also easy to set up as the side panel is on two hinges that easily open up, meaning you don't have to fiddle with screws, and it’s the same for the 4mm tempered glass.
It can also house four 2.5” SSDs and six 3.5” HDDs, so you have plenty of options for adding more storage besides the best NVMe SSDs that fit on your motherboard. Overall, this is a beast of a PC case with plenty of support for storage options, cooling solutions, and it should be able to easily house the RTX 5070 or 5070 Ti without any issues.
What users say
According to Amazon reviews, this casing has top-notch build quality, design, accessibility, capacity, and airflow. One reviewer said: “This has been my favorite case ever to build in. It’s just … easy. Cables are truly manageable. The hinged sides are great. The ability to customize is beautiful. You can add so many drives or remove the bays entirely. Tons of options for cooling. Lots of room for airflow. I’ve been using it for a few weeks now and things stay cool.”
- Max GPU length: 375 x 75 mm (LxH)
- I/O: 2 x USB 3.0, 1 x USB 3.2 Type-C, 1 x audio jack
- Included fans: 3 x 120mm
- Gives a complete inside view with its three glass panels
- Comes with three fans and a riser cable
- Excellent cable management
- Will need to purchase a PCIe 5.0 riser cable
- Can only mount the GPU vertically
If you're looking for a PC case that offers something different than traditional casing for the RTX 5070 or 5070 Ti, check out the HYTE Y60 Snow White. This is a dual-chamber ATX PC case with a panoramic view.
However, what sets it apart from others is that it comes with three 120mm fans and a PCIe 4 riser cable. Yes, this PC case is built to mount your GPU vertically only. That being said, RTX 5070 and 5070 Ti have PCIe 5 connectivity, so you might have to purchase a separate PCIe 5 riser cable to experience the full capabilities of these graphics cards.
It also supports ITX, mATX, ATX, and E-ATX motherboards with ATX PSUs up to 235mm in length. Regarding the GPU capacity, it can accommodate 375mm in length and 75mm in height. Good for the RTX 5070 Ti, but probably a bit better for the RTX 5070 FE.
When it comes to cooling solutions, it supports two 120mm or 140mm fans with a radiator on the side, one 360mm radiator or three 120mm fans, one 280mm radiator or two 140mm fans on the top, one 120mm fan in the back, and two 120mm or 140mm fans on the bottom.
There is also a slot beneath the GPU’s mount through which you can route the power cables, making cable management much easier. Besides that, it has one HDD sled and another, which can house two 2.4” SSDs.
All in all, this is a good PC case, with plenty of space inside, great aesthetics, and offers something unique. While vertically mounting a GPU might not be for everyone, it can look good, especially if your GPU fans have RGB fans that sync with the rest of the lights.
What users say
According to Amazon reviews, this casing has great aesthetics, build quality, airflow, and cooling capacity. One user stated: “So I’m currently starting my journey in building my first pc. I wanted to go with this case because i love the look of it and its ample air space. It definitely shows it. In person, it’s much bigger than i originally thought. But it is a great looking case! I can’t wait to buy the rest of the parts and put it together!”
- Max GPU length: 320mm
- I/O: 2 x USB 3.0, 1 x headphone, 1 x mic
- Included fans: 6 x PMW ARGB
- Comes with 6 per-installed fans
- Plenty of space for the RTX 5070 or 5070 Ti
- Comes at an affordable price point
- Fans speed and lighting can only be controlled if the motherboard has a 3-pin RGB connection
For those operating on a budget and want a good PC for their RTX 5070 or 5070 Ti, we recommend checking out the MUSETEX G07 PC case. This is an ATX casing that comes with 6 PWM ARGB fans installed, meaning all you have to do is make the relevant connections, and you're good to go.
However, to control the fan speed and lights, ensure your motherboard has a 3-pin RGB interface. These fans can also be automatically or manually adjusted via motherboard software, meaning you can set your custom fan curves depending on the workload.
The tempered glass on the side has magnetic hinges, making it easy to open, install, or change any component. This comes in handy when you're troubleshooting an issue and don't have to screw on and off the panel again and again.
This PC case can accommodate a 280mm radiator at max on the top, three 120mm fans in the front, two 120mm fans on the bottom above the PSU compartment, and a 120mm or 140mm fan on the rear. Since this casing comes with 6 120mm fans, you'll only have to purchase two more 120mm or 140mm fans to kit it out. If you're interested in exploring some options, check out our best 140mm fan guide for the top picks.
What this means is that there is a good capacity for cooling solutions in this PC case, which should keep your GPU and other components cool as the heat would be efficiently removed. As for the GPU capacity, it can support a maximum graphics card length of 320mm, which is much more than what the RTX 5070 or 5070 Ti would need.
So, you can rest easy knowing that you're getting a decked-out PC case with good features. Best of all, your GPU would have plenty of room to breathe. What makes it even better is the price point, making it affordable for anyone with an RTX 5070, 5080, or even a 5090.
What users say
According to Amazon reviews, this casing has excellent value for money, aesthetics, accessibility, and build quality. One reviewer said: “For a mid tower case this one here would be tough to beat… especially for the price and options. 6 ARGB pwm fans, good cable management design, wide enough for cables, clear tempered glass door that swings open… that I like, magnetic door latch 👍… oh and the feet at the bottom are not snapped in like other cases, these are held on by screws!!”
How to choose the best case for RTX 5070 and 5070 Ti
There are a couple of factors that you need to consider before buying a case for the RTX 5070 or 5070 Ti. This is important because airflow is a big factor to remember, as a restricted airflow can cause heating issues. So, we've listed a couple of them below.
Budget and airflow
The most important aspect to consider before buying any component of your gaming PC, including the PC case, is your budget. Many casings have fancy features, RGB lighting, and designs, but these factors will only increase the cost with minimal impact on performance.
So, we recommend filtering them based on budget and selecting a PC case that can house multiple fans, promoting good airflow. This will ensure that the heat generated by the GPU is efficiently redirected, keeping it and other components running cool.
Compatibility
The second factor to consider is the compatibility of the PC case. This means checking the internal measurements of the case and whether it can comfortably house an RTX 5070 or 5070 Ti. This will ensure that you don't get a PC case that can't hold these GPUs or that the space is too cramped, resulting in bad airflow.
In this case, bigger is better, as it means you'll have enough space to mount your GPU vertically if you want. A larger PC case can also hold 240mm, 360mm, or 420mm radiators with plenty of fans.