Last Updated on
Are you having trouble logging in to your CenturyLink router? Or are you encountering issues while doing an advanced setup for your CenturyLink modem?
Don’t worry; we’re here to help!
Follow these simple steps to access your router settings and make the necessary changes, so you can enjoy your CenturyLink internet plan right away!
Logging Into the Century Router
These are the steps that you need to take.
Step
Connect Your Device to the Router
Connect your device to the router’s network to log in to your CenturyLink router. Ensure your device is connected to the same Wi-Fi network as the router.
If you’re using a wired connection, plug an Ethernet cable into one of the router’s LAN ports and connect it to your device.
Step
Open Your Web Browser
Next, open your preferred web browser on your device. It could be Chrome, Firefox, or any other browser.
Step
Enter Your Router’s IP
To access your router settings, you must enter the router’s IP into the browser.
Usually, the IP for CenturyLink routers is 192.168.0.1, but it could differ depending on your router model.
Make sure to check your router’s documentation for the correct IP address.
Step
Enter Your Login Credentials
After entering the router’s IP address, you’ll be prompted to enter your login credentials.
If you haven’t changed your router’s login credentials, the default admin username and password are typically admin and admin.
However, if you’ve changed your login credentials before and don’t remember them, you’ll need to reset your router to its default settings.
You can do this by pressing and holding the reset button on the back of the router.
After a while, your admin password will be set to the default values.
Step
Access Your Router Settings
Once you’ve entered your login credentials, you’ll be taken to the router’s settings page.
From here, you can change your Wi-Fi network name and password, set up port forwarding, and perform other administrative tasks.
You can also change your SSID network name, dual-band settings, or create a transparent bridging.
Make sure to save any changes you make before logging out of your router’s settings page.
What Should I Do if I Forget My CenturyLink Router Login Credentials?
If you forget your login credentials or administrator password, you’ll need to reset your wireless router to its default settings.
To complete this, press and hold the reset button on the back of the router for 10–15 seconds until the router’s lights begin to flash.
This will reset your login credentials to the default values. It may also reset your router to the basic settings.
Conclusion
Logging in to your CenturyLink router is a simple process that only takes a few minutes.
Following the steps above, you can access your router settings and make necessary network changes (e.g., passphrase, internet connection, security key).
If you continue to have issues logging in to your router or Wi-Fi password, contact CenturyLink support and request their technicians for further assistance.
